• Hola, con los nuevos cambios del sitio he puesto diferentes tipos de publicidad que podrian resultar algo molestas. Sin embargo, luego de registrarte e interactuar un poco con la pagina, van a ser reemplazados por otros mas sutiles y pequeños! * A mi tampoco me gusta la publicidad, pero es una de las piezas para que el sitio esté disponible. Si bloqueas la publicidad, probá desactivarla unos dias.
    Gracias

[KERNEL] [G900H] [TW 5] KIAN KERNEL v1.0 OC 1.5GHz & 2.0GHz & 600MHz [2015/30/10]

ice

Usuario con historia
#1
Atención: Éste kernel con versiones 0.1, 0.2.1, 0.3 funciona en G900HXXU1BOG4 y con G900HXXU1BOG6 funciona la versión 5.x en adelante.
 
Colaboradores: 
googy_anas, zparallax, MOKIAAA
 
Características:
Build with Linaro GCC 4.9.4
Based on last kernel source
Based on Linux kernel version 3.10.9
Add LED control 
Enable unaligned capability for ARM
ARM: topology: Adjust efficiency ratio for Exynos5422
get_random_int to fix entropy depleting
Block: Reserve only one queue tag for sync IO
Enforce neon-vfpv4 
Added Busybox last version
Char_random tweak
Add CPUFREQ_RELATION_C and use it
little tweak to correctly restore min/max policies 
Make sync satisfy many requests with one invocation 
LZO decompression speedup on ARM by using unaligned access
Enable/Disable logger via sysfs
media & video codec tweaked
Schedule mmc on idle CPU
Fix inaccurate accounting for real-time task 
SELinux: Avoid enabling enforcing by conventional flag 
SELinux: hard permissive
Add wolfson sound engine
Don't update idle time if cpu offline 
Fix race that cause writeback hung 
Enable UNALIGNED_ACCESS
Enable ondemand
Optimized ARM RWSEM algorithm 
Fix compat msgrcv with negative msgtyp 
Network Speed Tweak 
Fix potential memory leak
add support for LZ4-compressed kernel 
Add Force Fast Charge
Enabled ARMV7 COMPAT
Implement KERNEL MODE NEON
Filter multicast packages while suspended
Add LZ4 support [Yank555.lu-LoungeKatt]
CPU unaligned access path
Add new routine cpufreq verify within cpu limits
Disable generic big.little + minor changes
Interactive: merge interactive governor from new G920F source
Create generic version of ablk_helper
Add ARM NEON implementation
Disable a lot of debugging
Disabling software CRCs (+30% Performance)
SPi CRC configurable
Fix compilation error due to frame size (usb_storage)
Fix DEBUG_SECTION_MISMATCH
Fix hsbadr_MultiSystem_Kernel
Fix memory leak in gpiod_sysfs_set_active_low
Fix dvfs problem
Implement CPU_GPU Clock & Voltage & Thermal controls
Close race between key lookup and freeing
Modem waketime change 
Prevent bringing up new CPUs during per-CPU initialization
Optimize copy_page for modern ARM platforms
Optimized ARM RWSEM algorithm
Drecrease time to enter sleep
Remove + sign from kernel version
Optimize apply slack
Add userspace knobs for users to filter some common excesive...
Added several tweaks and several optimizations
....soon more feature and tweak
 
Changelog:

LZ4 compressor and crypto modules updated
Optimized Wifi
Enabled INPUT_EXPANDED_ABS
Ported exynos nterface from Universal5410
Added a missing permission check to do_umount
Increased hash table size for better performance
Again drecrease time to enter sleep
Added new hook for userspace cortex-brain script
Selinux: Do not allow mode changes
SELinux: just shut up

add system wide power_efficient workqueues
and more ....
Enjoy!


v0.9

REVERT CPUFREQ_RELATION_C
REVERT merge interactive governor from new G920F source to stock
REVERT media & video codec tweaked
Increased default entropy settings to (512,2048)
Updates for Power Suspend
Optimized SLUB memory allocator
Ramdisk Tweaked
Optimized and Tweaked

v0.8
Rebased with last source (G900HXXU1BOG6)
Add security in-core xattr support
DEFAULT DVFS changed from 266 to 350
Full neon-vfpv4 support
Implement KERNEL MODE NEON
Added charger control
Enable mounting cifs drives visible to all apps
Increase booting freq to 1.5GHz
Now CPU Remember last policy min&max on cluster restart
Check cpuidle_enable_device() return value
Request based dm-crypt
Added powersuspend driver
Added display panel hooks for powersuspend
Now configurable android log buffer sizes
Added some validation of lvds values
Added Dynamic read ahead
Fixed potential memory leak in path_lookupat
Added a switch for fork migration on big domain
Added missing videodev2 exynos headers
Clear page active before releasing pages
Fix potential logical errors
Now you can change TEMP control for reduce performance for period of time @Stweak in MISC tab/TEMPERATURE CONTROL
REVERT GPU some tweak to stock
and more...

v0.7.2
Mistake frq in gpu fixed (677 MHz)
sorry

v0.7.1
Revert again CPU min frq to 200mhz and work with interactive GOV, if you do not like, change it @Stweak and dont have music stutter problems in deep sleep
Overclock GPU to 600MHZ
Tweaked again
Note: The first boot after flash this kernel speed may be lower, The problem only for the first time and then enjoy a lower battery consumption.

v0.7

LMK Tune up
Improve 3x faster integer sqrt
Now arch_power & gentle fair sleepers switchable @Stweak
Ported HOTPLUG_THREAD_STOP from N920F
Fixed a potential memory leak
Fixed an issue that FACS initialization is performed twice
Fixed footbridge clockevent device
Set LCD {0,1} enable lines when turning on CLCD
Fixed frequency typos
Fixed sparsemem build
Fixed bio_integrity_verify segment start bug
Fixed gendisk reference leak
Use kmem_cache_free when freeing entry in inode cache
Allow clocksources to be selected earlier
Enabled CLEANCACHE & ZCACHE
Fixed the setting of PF_DUMPCORE
Raise CPU OC to 1.5GHz and for A57 to 2.0GHz (Greater frequency of this does not work)
Revert GPU OC
Fixed a bug in tree bucket decode
Sensorhub: reduce wakelock time
Fixed lookup_dcookie() parameter handling
Fixed parameter handling for compat readv_writev syscalls
Fixed the too small buffer for dname
Fixed 2 bugs in msgrcv() MSG_COPY implementation
Modify message queue accounting to not take kernel data
Wake up worker only when the worker is idle
Use slowpath for cross page cached accesses
Added missing curly braces
Don't wait for congestion when mem is high
Fixed swapoff hang after page migration and fork
Pass readahead info down to the i_o scheduler
Fixed lockdep splat
Fixed irq_work 'tail' recursion
Fixed memory corruption when retrying atomic copy
Fixed stack info leak in timer_create()
Revert "gpu: more changes to reduce lags"
Implement smarter wake-affine logic
Optimize find_busiest_queue()
Fixed inode security list corruption
Fixed incorrect AI range code handling
Fixed posix_acl_file_xattr_userns gid conversion
Fixed bad hashing of dentries
Allow rescuer thread to do more work
Fixed occasional slow sync
Fixed writeback cache thrashing
Fixed BUG when booting
Optimize Sfck Compression

0.6.1

Optimize for non-rotational
Fix a race in elevator switching and md device initialization
Fix "unautorised actions are detected reboot your device for desintall them" error [ @ yanis488 ]
v0.5
Revert Some tweak for stability
Speedup WB_SYNC_ALL pass called from sync
Sync: don't block the flusher thread waiting on IO
fs_aio.c: Asynchronous I_O latency to a solid-state disk greatly incrased
Input-touchscreen Added input-booster event (from S6)
sched: Reduce overestimating rq->avg_idle
sched_deadline: Fix a precision problem in the microseconds range

v0.4.2
now stweak working but not fully, use it at cpu and gpu is RISK! to be careful 
Busybox Fully Fixed 
LED NOTIFI. Brighter
several tweaks and several optimizations for better performance with battery life
 
v0.4.1
Fixed Stweaks error (again say not fully work because not enough time)
Fixed Busybox
several tweaks and several optimizations for better performance with battery life
etc.
 
v0.4
Lag bug fixed
Ramdisk updated to G900HXXU1BOG6
Revert several mod for better performance
several tweaks and several optimizations
 
v0.3
Enabled ARMV7 COMPAT
Implement KERNEL MODE NEON
Filter multicast packages while suspended
Add LZ4 support [Yank555.lu-LoungeKatt]
CPU unaligned access path
Add new routine cpufreq verify within cpu limits
Disable generic big.little + minor changes
Interactive: merge interactive governor from new G920F source
Create generic version of ablk_helper
Add ARM NEON implementation
Disable a lot of debugging
Disabling software CRCs (+30% Performance)
SPi CRC configurable
Fix compilation error due to frame size (usb_storage)
Fix DEBUG_SECTION_MISMATCH
Fix hsbadr_MultiSystem_Kernel
Fix memory leak in gpiod_sysfs_set_active_low
Fix dvfs problem
Implement CPU_GPU Clock & Voltage & Thermal controls
Close race between key lookup and freeing
Modem waketime change 
Prevent bringing up new CPUs during per-CPU initialization
Optimize copy_page for modern ARM platforms
Optimized ARM RWSEM algorithm
Drecrease time to enter sleep
Remove + sign from kernel version
Optimize apply slack
 
Nota:
Stweak no funciona correctamente (se encuentra trabajando para solucionarlo, si alguien quiere ayudar, recurrir al thread original).
 
Fix:
A. Inconveniente de contraseña de WiFi
1. Abrir build.prop
2. buscar la línea: ro.securestorage.support
3. Cambiar de true a false
 
Instalación:
1. Iniciamos en recovery
2. Flasheamos el zip
3. Hacemos wipe dalvik cache
4. Reiniamos 
 
A disfrutar!
 
Descarga:
v0.1
v0.2 BETA
v0.3 BETA
v0.4 BETA
v0.4.1 BETA
v0.4.2 BETA
v0.5 BETA

v0.6 BETA

V0.6.1 BETA

V0.7 BETA

V0.7.1 BETA

V0.7.2 BETA

V0.8 BETA

V0.9 BETA

V1.0 Estable

Kernel Stock:

Descarga

Screenshot_2015-08-13-13-02-30_1_.png

26654144715554515612_attachment.png
 
Última edición por un moderador:
#2
Hola me podrías decir que ventajas trae el kernel y si es compatible con la rom zephyr v9?
 


OP
OP
ice

ice

Usuario con historia
#3
zacksart,las características/ventajas de tener un custom kernel son la que están en dónde dice "Características". No se encuentra traducido porque no tuve tiempo de hacerlo, pero con google translator seguro vas a entender. :)

Update!
Kerenl actualizado a la versión 0.7! Changelog en el post #1.
 
Última edición por un moderador:

Damiancito

Usuario con historia
#4
zacksart,las características/ventajas de tener un custom kernel son la que están en dónde dice "Características". No se encuentra traducido porque no tuve tiempo de hacerlo, pero con google translator seguro vas a entender. :)


Update!
Kerenl actualizado a la versión 0.7! Changelog en el post #1.
Che ice, lo probaste a este kernel? Ando con ganas de ponerlo pero no me animo jaja
 
OP
OP
ice

ice

Usuario con historia
#5
Che ice, lo probaste a este kernel? Ando con ganas de ponerlo pero no me animo jaja
Si, no la última versión, pero si, funciona bien, interesante el desarrollo. Igual como todo custom kernel, como te puede funcionar muy bien, como no.

[N]ation Special Edition by ice


 Kernel Actualizado a la versión 0.7.2

Kernel Actualizado a la version 0.9
Changelog en el post #1.
 
Última edición por un moderador: