• Hola, con los nuevos cambios del sitio he puesto diferentes tipos de publicidad que podrian resultar algo molestas. Sin embargo, luego de registrarte e interactuar un poco con la pagina, van a ser reemplazados por otros mas sutiles y pequeños! * A mi tampoco me gusta la publicidad, pero es una de las piezas para que el sitio esté disponible. Si bloqueas la publicidad, probá desactivarla unos dias.
    Gracias

Overclocked Kernel

Estado
Cerrado para nuevas respuestas.
#1
Esta de mas aclarar que ni yo ni GrupoAndroid nos responsabilizamos por el mal flasheo o mal configuracion que podes darle al kernel, si sos un novato total pregunta todo lo que no entiendas que se te sera respondido, no sabes como flashear pregunta, aunque sea un pregunta muy *****, hacela!!!!!!!!!!!

Basado en el nuevo source code de HTC.

compatible con roms basadas en el firm 3.33 al 100%. Tambien las sense 4.0/4.1

Compatible tanto para Sensation y Sensation xe.

Cpu overloqueado, CPU optimizado con frecuencias de hasta 1.8 GHZ (1512 default) y cache L2 hasta 1512 mhz

Incrementados los limites de voltajes min:700mV max 1400mV

Added CPU Voltage Table interface that allows voltage adjustment.

Arreglado CPUFreq.

GPU overloqueado (3D mode from 267 MHz to 320 MHz (300 MHz by default), increased bus bandwidth.

Camera flash: low battery limit decreased to 10%.

Added USB OTG.

Enabled USB Host.

Added support for different types of USB peripherals: USB Hub, USB mass storage devices (e. g. USB HDD, USB Stick, MP3 player), USB HID devices (e. g. USB mouse, USB keyboard, Wireless mouse or keyboard with USB receiver).

v1.5.2

Added USB HID.

Added drivers for USB HID devices.

v1.5.1

Enabled USB OTG.

Added NTFS support.

Added SCSI.

Added USB Host.

Added USB storage and USB storage drivers.

Fixed /system/etc/vold.fstab.

v1.5.0

Implemented all updates from newest HTC kernel source code for 3.33.401.6 based ROMs.

Included newest mpdecision binary, hex edited to prevent from changing minimum and maximum CPU frequency.

v1.4.1

Default maximum GPU 2D frequency set to 200 MHz.

Increased GPU bus bandwidth in 3D mode.

Added few fixes from HTC Vivid kernel.

Added Wi-Fi module for ICS with HTC Sense 4.0 based ROMs.

Fixed haptic feedback.

v1.4.0

Fixed ACPU and perflock to allow setting different maximum CPU frequency than highest available.

Fixed issue with changing minimum and maximum CPU frequencies by the system daemons. Replaced thermald.

Extended CPU voltage limits.

v1.30.4

Added CPU Voltage Table - interface that allows adjustment of the CPU voltage (thanks to snq-, faux123 and show-p1984).

Updated touchscreen driver with multi-touch issue fixed by HTC.

Override refresh rate for Sense 4 (thanks to virtuous).

Changed low battery limit for camera flash.

v1.30.3

Overclocked GPU in 2D mode to 229 MHz.

Added 300 MHz GPU clock settings.

Modified Adreno220 drivers.

Overclocked GPU in 3D mode to 300 MHz by default, maximum 320 MHz.

v1.30.2

Touchscreen drivers fixed.

v1.30.1

First release built from source code. Thanks to HTC!

Optimized.

Touchscreen drivers partially fixed.

Added higher values to L2 cache frequency tables.

Updated CPU frequency tables.

Added support for zRam swap.

CIFS, SquashFS.

Enabled CPUFreq stat.

v1.20

Based on new kernel 3.0.16-gda3fdfc.

v1.11

Five kernel versions with different maximum CPU frequency.

Finally fixed CPUFreq, mfreq related bug (only one instruction changed in kernel code).

v1.10

First release based on kernel 3.0.16-gcfa14fc.

Modified CPU frequency tables, CPU speed limits and voltage limits.

Temporarily fixed CPUFreq related bug in HTC kernel.

Modified information about CPU frequency displayed in Hardware information.

CPU Temperature daemon:

thermald v1.0.0 (SebastianFM)

The thermald daemon is a system service which monitors CPU temperature. It turns on the thermal sensor and sets thresholds to the thermal driver. Threshold are defined in file /system/etc/thermald.conf. If temperature reaches threshold, kernel sends notification to userspace. When thermald receives notification, it decreases CPU frequency to avoid CPU overheat.

The stock thermald doesn't work properly because when the CPU temperature drops below threshold, or when mpdecision turns on the second core, it always sets maximum CPU frequency to the highest available frequency.

I wrote my own thermald daemon which works very similiar, but when the CPU temperature is too high, it saves the current maximum CPU frequency and restores it later.

Currently my thermald doesn't parse external config file, it uses predefined thresholds.

Code:

[tsens_tz_sensor0]

sampling 3000

thresholds 75 78 81 84 87

thresholds_clr 72 75 78 81 84

actions cpu cpu cpu cpu cpu

action_info 1296000 1188000 918000 756000 384000

If you include my thermald in your ROM or kernel package, please don't forget give credit to me.

Current downloads:

v. 1.5.2

Todo el credito a Sebastianfm, yo solo comparto esto a uds
 
Última edición por un moderador:
Estado
Cerrado para nuevas respuestas.